User's Manual
Table Of Contents
- Introduction
- Basic Operations
- Loading and Removing the Roll Paper
- Loading and Removing Cut Sheets
- Loading and Removing Poster Board
- Viewing and Changing Media Settings
- Replacing Paper
- Using the Paper Basket (T7270/T5270/T3270)
- Using the Large-Capacity Paper Basket (T7270D/T5270D)
- Using the Auto Take-up Reel Unit (T7270 Only)
- Basic Printing Methods (Windows)
- Basic Printing Methods (OS X)
- Printable area
- Using the Power Off Timer
- Canceling Printing
- Saving to and Reprinting on the Optional Hard Disk Unit
- Copying and Scanning
- Print From Folder
- More Ways to Print
- Enlargements and Horizontal and Vertical Banners
- Printing at Non-Standard Sizes
- Printing CAD Drawings
- Switching Roll Paper Automatically before Printing (T7270D/T5270D Only)
- Borderless Printing
- Correct color and print
- Multi-Page/Poster Printing
- Printing Multiple Documents (the Layout Manager) (Windows Only)
- Color Management Printing
- Tips for Using the Printer Driver (Windows)
- Tips for Using the Printer Driver (OS X)
- Using the Control Panel Menu
- Maintenance
- Problem Solver
- Appendix
- Where To Get Help
- Software License Terms
Epson SureColor T-Series User’s Guide
Basic Operations
42
Buttons that are used in the following settings
1
Turn on the printer by pressing the P button.
2
Press the ( button on the control panel. Press
the d/u button to highlight Poster Board and
press the Z button.
3
Raise all the poster board supports.
Press the supports diagonally downwards and
then lift them straight up.
4
Place the side to printable face up with its edge
in front of the projecting supports as shown.
Note:
The paper that can be used in the printer is detailed in
the following section.
U“Supported Media” on page 199
Note:
Closing the paper basket makes the work easier.
T7270/T5270/T3270 U“Storing and Opening”
on page 48
T7270D/T5270D U“Storing” on page 51