User's Manual
Table Of Contents
- Introduction
- Basic Operations
- Loading and Removing the Roll Paper
- Loading and Removing Cut Sheets
- Loading and Removing Poster Board
- Viewing and Changing Media Settings
- Replacing Paper
- Using the Paper Basket (T7270/T5270/T3270)
- Using the Large-Capacity Paper Basket (T7270D/T5270D)
- Using the Auto Take-up Reel Unit (T7270 Only)
- Basic Printing Methods (Windows)
- Basic Printing Methods (OS X)
- Printable area
- Using the Power Off Timer
- Canceling Printing
- Saving to and Reprinting on the Optional Hard Disk Unit
- Copying and Scanning
- Print From Folder
- More Ways to Print
- Enlargements and Horizontal and Vertical Banners
- Printing at Non-Standard Sizes
- Printing CAD Drawings
- Switching Roll Paper Automatically before Printing (T7270D/T5270D Only)
- Borderless Printing
- Correct color and print
- Multi-Page/Poster Printing
- Printing Multiple Documents (the Layout Manager) (Windows Only)
- Color Management Printing
- Tips for Using the Printer Driver (Windows)
- Tips for Using the Printer Driver (OS X)
- Using the Control Panel Menu
- Maintenance
- Problem Solver
- Appendix
- Where To Get Help
- Software License Terms
Epson SureColor T-Series User’s Guide
Saving to and Reprinting on the Optional Hard Disk Unit
69
Saving to and
Reprinting on the
Optional Hard Disk
Unit
Function Summary
When an optional hard disk unit or Adobe PostScript 3
Expansion Unit (hereinafter referred to as the hard
disk) is installed, print jobs can be viewed and managed
as described below.
Extended functions
Print jobs can be viewed and managed as described
below.
c
Important:
The optional hard disk unit for the
T3000/T5000/T7000 cannot be installed to this
printer. Always use a hard disk unit intended for
this printer.
U“Options and Consumable Products” on page
197
• Viewing Print Jobs
When there are multiple print jobs with some in the
queue, the following information can be displayed.
O Estimated print start time
O Estimated print time
O Other information, including whether the job can
be printed without replacing consumables
• Viewing and Resuming Held Print Jobs
(T7270/T5270/T3270 only)
If the source or other settings selected with the printer
differ from the settings specified in the print job, an
error will occur and printing will be suspended.
When an error occurs, printing cannot be restarted
until the printer has been readied by, for example,
replacing the paper.
However, the following types of print job can be held
temporarily on the hard disk.
Therefore, after printing all the jobs that can be printed
with the current paper, you can replace the paper with
the media specified in the held print jobs and resume
printing, making your work more efficient.
O Print jobs that specify sources that differ from that
selected with the printer
O Print jobs that specify paper types that differ from
that selected with the printer
O Print jobs that specify output paper sizes (widths)
that are larger than that selected with the printer
Note:
Held print jobs can be saved if On is selected for
Store Held Job in the control panel Setup menu.
The factory default setting is Off.
U“Setup menu” on page 147
• Viewing and Printing Stored Jobs
Print jobs can be stored on the hard disk and printed at
a later date.
Print jobs selected for printing at a later date can be
printed directly on the hard disk without increasing the
load on your computer.
Print jobs are saved using the printer driver.
U“Saving Print Jobs” on page 70
Note:
O Large copy and enlarged copy print jobs
created with an optional Multifunction
Scanner or a commercially available scanner
connected to the printer cannot be saved to
the hard disk.
O Jobs printed with the following applications
are always saved to the hard disk.
For information on other applications, see the
software documentation or online help.
O LFP Print Plug-In for Office
O EPSON CopyFactory5