User's Manual

Epson SureColor T-Series User’s Guide
Copying and Scanning
74
Starting Copy Manager
Copy Manager is equipped with the printer's network
interface and functions if one of the following is
installed to the printer.
O Multifunction scanner
O Hard disk unit
O Adobe PostScript 3 expansion unit
However, if the Multifunction Scanner is not installed,
you cannot use the large copying and large scanning
functions.
The following procedure describes how to start Copy
Manager.
1
Start a web browser on a tablet terminal or
computer connected to the printer via the
network.
2
Enter the IP address specified on the printer in
the address bar, and then press the Enter key or
the return key.
3
In the displayed screen, click Copy Manager.
The printer does not have a wireless LAN function. To
connect the printer and a tablet terminal over the
network, you need a wireless LAN router or wireless
LAN access point.
Scan To e-mail ✓✓
Receive e-mail ✓✓
Scan To Shared Folder ✓✓
Scan To HDD ✓✓
Operations for image
files that were scanned
or received by e-mail
*2*3
Print
*4
✓✓
Thumbnail display ✓✓
Send as an e-mail
attachment
✓✓
Send to a folder ✓✓
Download file - ✓
Delete ✓✓
Add or edit e-mail
destination addresses
- ✓
Add or edit shared folder
addresses
- ✓
Check file operation
history
- ✓
Scanner maintenance
Calibration ✓ -
Feed Adjust ✓ -
*1 Available only when the optional hard disk unit or
Adobe PostScript 3 Expansion Unit has been
installed.
*2 In the case of Scan To e-mail and Scan To Shared
Folder as well, all scanned image files are saved to
the hard disk of the printer.
*3 Operation is possible whether the optional
Multifunction Scanner is installed or not.
*4 You can only print PDF files and TIFF files when the
optional Adobe PostScript 3 expansion unit is
installed.
Control
panel
Copy
Manager