User's Manual

Epson SureColor T-Series User’s Guide
Copying and Scanning
77
Remove the paper eject guides
If the paper eject guides are left attached, the document
will strike them and not be ejected.
Set the document eject direction to forward
If the document is ejected backward with the paper
eject guides removed, the document will fall to the rear
side and be damaged by folding or dirt.
U“How to change the document eject direction and
scanning accuracy” on page 78
Ensure there is space to the front and back
When the document is read, it is pushed out forward
and backward. The approximate amount of space
required is shown below. If the printer is set up near a
wall, make sure there is enough space at the rear.
How to Load Documents
1
Align the loading guide with the document
loading position.
To ensure that the document is not fed on an
angle, we recommend inserting the long side of
the document.
Paper Size Forward (a) Backward (b)
A2 185mm 220mm
A1 432mm 467mm
24  30 inch 353mm 388mm
30  40 inch 607mm 642mm