User's Manual
Table Of Contents
- Introduction
- Basic Operations
- Loading and Removing the Roll Paper
- Loading and Removing Cut Sheets
- Loading and Removing Poster Board
- Viewing and Changing Media Settings
- Replacing Paper
- Using the Paper Basket (T7270/T5270/T3270)
- Using the Large-Capacity Paper Basket (T7270D/T5270D)
- Using the Auto Take-up Reel Unit (T7270 Only)
- Basic Printing Methods (Windows)
- Basic Printing Methods (OS X)
- Printable area
- Using the Power Off Timer
- Canceling Printing
- Saving to and Reprinting on the Optional Hard Disk Unit
- Copying and Scanning
- Print From Folder
- More Ways to Print
- Enlargements and Horizontal and Vertical Banners
- Printing at Non-Standard Sizes
- Printing CAD Drawings
- Switching Roll Paper Automatically before Printing (T7270D/T5270D Only)
- Borderless Printing
- Correct color and print
- Multi-Page/Poster Printing
- Printing Multiple Documents (the Layout Manager) (Windows Only)
- Color Management Printing
- Tips for Using the Printer Driver (Windows)
- Tips for Using the Printer Driver (OS X)
- Using the Control Panel Menu
- Maintenance
- Problem Solver
- Appendix
- Where To Get Help
- Software License Terms
Epson SureColor T-Series User’s Guide
Copying and Scanning
79
Buttons that are used in the following settings
1
At Large copy/Large scan screen, use the d/u
buttons to select Scanner Maintenance and
press the Z button.
2
Use the d/u buttons to select Eject Direction or
Scan Speed and press the Z button.
3
Use the d/u buttons to select the desired option
and press the Z button.
4
Press the W button to exit.
Large Copying
This section describes the procedure to copy on the
control panel of the printer.
Copies are printed along the following loading paths
depending on the model you are using.
O T7270/T5270/T3270
Loaded roll paper or cut sheet
O T7270D/T5270D
Select a Source for the Copy Settings from Roll 1,
Roll 2, Roll Auto, or Cut Sheet.
Buttons that are used in the following settings
1
Turn on the printer by pressing the P button.
When the printer is turned on, the scanner is
also turned on.
2
Load paper suitable for large copying on the
printer.
U“Epson Special Media Table” on page 199
3
Load document on the scanner.
U“When you load a document that is more
than 0.25mm thick” on page 76
4
Make sure that the Large copy/Large scan screen
appears.
If another screen appears, use the l/r buttons
to select the tab.
5
At Large copy/Large scan screen, use the d/u
buttons to select Copy and press the Z button.
The Large copy screen appears.
6
On the Large copy screen, you can press the
d/u buttons to select the number of copies.
Press the Z button to start copying.