User's Manual
Table Of Contents
- Introduction
- Basic Operations
- Loading and Removing the Roll Paper
- Loading and Removing Cut Sheets
- Loading and Removing Poster Board
- Viewing and Changing Media Settings
- Replacing Paper
- Using the Paper Basket (T7270/T5270/T3270)
- Using the Large-Capacity Paper Basket (T7270D/T5270D)
- Using the Auto Take-up Reel Unit (T7270 Only)
- Basic Printing Methods (Windows)
- Basic Printing Methods (OS X)
- Printable area
- Using the Power Off Timer
- Canceling Printing
- Saving to and Reprinting on the Optional Hard Disk Unit
- Copying and Scanning
- Print From Folder
- More Ways to Print
- Enlargements and Horizontal and Vertical Banners
- Printing at Non-Standard Sizes
- Printing CAD Drawings
- Switching Roll Paper Automatically before Printing (T7270D/T5270D Only)
- Borderless Printing
- Correct color and print
- Multi-Page/Poster Printing
- Printing Multiple Documents (the Layout Manager) (Windows Only)
- Color Management Printing
- Tips for Using the Printer Driver (Windows)
- Tips for Using the Printer Driver (OS X)
- Using the Control Panel Menu
- Maintenance
- Problem Solver
- Appendix
- Where To Get Help
- Software License Terms
Epson SureColor T-Series User’s Guide
More Ways to Print
94
If the setting is not Roll Auto - XXXXX, click it
and select Roll Auto - XXXXX.
3
For Media Type, select the paper type you want
to use for printing.
In this example, Plain Paper or Singleweight
Matte Paper is selected depending on the
purpose of its use.
4
Set Paper Size, Print Quality, and other
necessary settings, and then print.
If a message The Media Type differs to the
setting on the printer. is appears, click Ignore.
Making Settings for OS X
1
Using the control panel of the printer, confirm
Type Match is set in Setup menu > Printer
Setup > Roll Paper Setup > Roll Switch
Condition > Paper Type.
The default Paper Type setting is Type Match.
If the setting has not been changed, the setting is
Type Match.
U“Setup menu” on page 147
2
On the computer, open the Print screen,
confirm that Paper Size is Roll Paper, and then
select Printer Settings from the list.
3
Check that the Roll Switch is Auto.
If the setting is not Auto, click it and select
Auto.
4
For Media Type, select the paper type you want
to use for printing.