User's Manual
Table Of Contents
- Contents
- Introduction to Your Printer
- Wi-Fi or Wired Networking
- Media Handling
- Printing from a Computer
- Printing with Windows
- Selecting Basic Print Settings - Windows
- Selecting Print Layout Options - Windows
- Selecting Advanced Settings - Windows
- Selecting Additional Settings - Windows
- Printing Your Document or Photo - Windows
- Saving, Sharing, and Customizing the Printer Settings
- Selecting Default Print Settings - Windows
- Changing the Language of the Printer Software Screens
- Changing Automatic Update Options
- Printing with the Built-in Epson Driver - Windows 10 S
- Printing on a Mac
- Printing CAD Drawings
- Printing with Windows
- Printing from a USB Memory Device
- Using Your Printer as a Copier
- Using the Control Panel Menus
- Replacing Ink Cartridges and Maintenance Boxes
- Adjusting Print Quality
- Maintenance and Transportation
- Solving Problems
- Technical Specifications
- Notices
181
7. If you are moving the product on the stand, do the following:
• Close the paper basket.
• Release the caster locks.
• Move the product on an even floor surface.
• Lock the casters in the new location.
Caution: Do not move the product with locked casters. Avoid areas with steps or uneven flooring.
Note: If you are transporting or storing the product below 14°F (–10°C), you must discharge the ink.
See the link below for instructions.
8. If you are transporting the product, place it in its original packing materials, if possible, or use
equivalent materials with cushioning around the product.
9. After the printer is moved, connect the power cable and turn on the printer.
10. Run a print head nozzle check and clean the print head, if necessary.
Discharging Ink
Parent topic: Maintenance and Transportation
Related tasks
Cleaning the Print Head Using the Product Control Panel
Checking the Nozzles Using the Product Control Panel
Discharging Ink
If you need to move or transport your product when the temperature is 14°F (–10°C) or lower, you must
first discharge the ink to keep the print head in optimum condition.
Note: The maintenance box needs enough capacity to discharge the ink. Replace the maintenance box
first if the remaining capacity is low.
1. Turn on the product.
2. Remove all the paper from the product.
3. Press the home button, if necessary.
4. Select Settings > Maintenance > Discharging/Charging Ink > Start.