User's Manual

47
14. Select the paper type you loaded on the LCD screen and set the remaining amount, if necessary.
Note: If the roll paper has a barcode printed on it, the printer will read it and automatically load the
correct settings. If you do not select settings within 90 seconds, the printer uses the displayed
settings automatically.
15. Open the paper basket.
Note: If you are printing banners or other media larger than can fit in the paper basket, close the
paper basket. Hold the ejected paper in both hands and support it so that the paper does not touch
the floor.
Parent topic: Roll Paper Handling
Related references
Paper Specifications
Compatible Epson Papers
Roll Paper Options - Windows
Related tasks
Removing Roll Paper
Selecting Advanced Settings - Mac
Cutting Roll Paper
The printer has a built-in cutter that can automatically cut most paper types. When Auto Cut is turned
on, paper is automatically cut after each page prints, or if the roll paper leading edge is not straight.
Caution: The built-in cutter is not recommended for use with commercially available canvas or synthetic
paper, as it may dull the blade and require more frequent blade replacement. When you print on this
paper type, turn off the Auto Cut setting and cut the print off the roll manually.
To switch between automatic or manual cutting methods, adjust the Auto Cut settings in the printer
driver. The setting selected in the printer driver overrides the control panel setting.
Cutting Roll Paper Manually
Parent topic: Roll Paper Handling
Related references
Roll Paper Options - Windows