Specifications

SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE

MODEL NO: 12232-10

PACIFIC DISPLAY DEVICES 04.25.2012 19

Storage

• When storing the LCD modules, avoid exposure to direct sunlight or to the light of fluorescent lamps

• Store the module in a dark place where the temperature is 25

C ±10

C and the humidity below 65% RH.

• Do not store the module near organic solvents or corrosive gases.

• Do not crush, shake, or jolt the module (including accessories).

Cleaning

• Do not wipe the polarizing plate with a dry cloth, as it may scratch the surface.

• Wipe the module gently with soft cloth soaked with a petroleum benzene.

• Do not use ketonic solvents (ketone and acetone) or aromatic solvents (toluene and xylene), as they may damage the

polarizing plate.

Others:

• Liquid crystals solidify under low temperature (below the storage temperature range) leading to defective orientation

or the generation of air bubbles (black or white). Air bubbles may also be generated if the module is subject to a low

temperature.

• If the LCD modules have been operating for a long time showing the same display patterns, the display patterns may

remain on the screen as ghost images and a slight contrast irregularity may also appear. A normal operating status can

be regained by suspending use for some time. It should be noted that this phenomenon does not adversely affect

performance reliability.

• To minimize the performance degradation of the LCD modules resulting from destruction caused by static electricity

etc., exercise care to avoid holding the following sections when handling the modules.

- Exposed area of the printed circuit board.

- Terminal electrode sections.