Installation Guide

ManualsBrandsEpson ManualsPrintersEpson Structural Round Ceiling Plate

Model: ELPMBP03

3215 W. North Ave. • Melrose Park, IL 60160 • (800) 865-2112 or (708) 865-8870 • Fax: (708) 865-2941 • www.peerlessmounts.com

Maximum UL Load Capacity: 150 lb (68 kg)

This product is UL Listed. It must be

installed by a qualified professional

installer.

Installation and Assembly:

Structural Round Ceiling Plate

Manufactured by Peerless Industries, Inc.

ISSUED: 02-13-08 SHEET #: 054-9126-2 07-10-08

Summary of content (7 pages)

PAGE 1
Installation and Assembly: Structural Round Ceiling Plate Model: ELPMBP03 R This product is UL Listed. It must be installed by a qualified professional installer. Maximum UL Load Capacity: 150 lb (68 kg) Manufactured by Peerless Industries, Inc. 3215 W. North Ave. • Melrose Park, IL 60160 • (800) 865-2112 or (708) 865-8870 • Fax: (708) 865-2941 • www.peerlessmounts.
PAGE 2
NOTE: Read entire instruction sheet before you start installation and assembly. WARNING • Do not begin to install your product until you have read and understood the instructions and warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, call Peerless customer care at 1-800-729-0307.
PAGE 3
Before you begin, make sure all parts shown are included with your product. Parts List A B C D E F G Description round ceiling plate #14 x 2.5" wood screw M5 x .8 x 10 mm phillips screw M5 x .8 x 10 mm socket pin screw 4 mm allen wrench rubber grommet concrete anchor Qty. 1 4 1 1 1 1 4 Part # 055-2798 5S1-015-C04 520-2005 520-2031 560-9646 530-9401 590-0097 NOTE: Some parts may appear slightly different than illustrated. A F B D C E G 3 of 7 Visit the Peerless Web Site at www.peerlessmounts.
PAGE 4
1 Place grommet (F) into hole of ceiling plate (A). A NOTE: Make sure grommet overlaps retaining collar. Grommet may require some force to fit in hole and will appear slightly deformed. RETAINING COLLAR F WARNING • For safety, extension column must be locked to threaded fitting with screw. Extension Column Applications 2 Insert end of extension column into threaded fitting of ceiling plate (A). Tighten four or five complete turns.
PAGE 5
Installation to Wood Joist Finished Ceilings, Exposed Wood Joists, or Wood Beam Ceilings WARNING • Installer must verify that the supporting surface will safely support the combined load of the equipment and all attached hardware and components. • Tighten wood screws so that ceiling plate is firmly attached, but do not overtighten. Overtightening can damage the screws, greatly reducing their holding power. • Never tighten in excess of 80 in. • lb (9 N.M.).
PAGE 6
Installation to Solid Concrete WARNING • Concrete must be 2000 psi density minimum. Lighter density concrete may not hold concrete anchor. • Make sure that the supporting surface will safely support the combined load of the equipment and all attached hardware and components. 3 Use ceiling plate (A) as a template to mark holes. Drill four 1/4" (6 mm) dia. holes to a minimum depth of 2.5" (64 mm). Insert four anchors (G) in holes flush with ceiling as shown in figure 3.1. fig. 3.
PAGE 7
LIMITED FIVE-YEAR WARRANTY 3HHUOHVV ,QGXVWULHV ,QF HVWDEOLVKHV D ZDUUDQW\ SHULRG RI ÀYH \HDUV IRU SURGXFWV PDQXIDFWXUHG RU VXSSOLHG E\ 3HHUOHVV 7KLV SHULRG FRPPHQFHV IURP WKH GDWH RI VDOH RI WKH SURGXFW WR WKH RULJLQDO FRQVXPHU EXW ZLOO LQ QR FDVH ODVW IRU PRUH WKDQ VL[ \HDUV DIWHU WKH GDWH RI WKH SURGXFWҋV PDQXIDFWXUH 'XULQJ WKH ZDUUDQW\ SHULRG VXFK SURGXFWV ZLOO EH IUHH IURP GHIHFWV LQ PDWHULDO DQG ZRUNPDQVKLS SURYLGHG WKH\ DUH LQVWDOOHG DQG XVHG LQ FRPSOLDQFH ZLWK WKH LQVWUXFWLRQV HVWDEOLVKHG E