Service manual

ADDENDUM
Disassembly and Assembly
Stylus-800/1000 SERVICE MANUAL
3.1.2 Paper Feed Motor Removal
[Step 1]
Remove the printer mechanism. (Refer to 3.1.1.)
[Step
2]
Remove two screws ((CBS M3x1O)X2) which fixing the paper feed motor.
[Step 3]
Turn the paper feed motor for about 90 degree, as shown in figure below, so that one of fixing tab
of the motor released from a holding plate.
[Step 4]
Take out the paper feed motor.
/
u Ii
(m
.O.’.
,, , .
., . ., ‘@
“m
.
‘o
{/l’fn N
II
L
J
Paper Feed Motor
Figure 3-2 Paper Feed Motor Removal
.
3-2
REV.-A