Service manual

ADDENDUM

Stylus-800/1000 SERVICE MANUAL

Disassembly and Assembly

3.1.3 Paper Feed Roller Assembly Removal

[Step 1]

Remove the printer mechanism. (Refer to 3.1.1.)

[Step 2]

Remove the carriage assembly. (Refer to

SVIUS-800

S\M

(Section

3.2.6.5.)

[Step 3]

Remove four screws

((CBB

M3x1O)X4, two each at left and right side) and remove the rear base

frame.

[Step 4]

Unhook the transmission gear assembly which attached at the left end of the paper ejection

roller

shaft, and then remove the paper feed roller assembly.

‘(

Figure 3-3 Paper Feed Roller Assembly Removal

REV.-A

3-3