Service manual
ADDENDUM
General Description
Stylus-800/1000 SERVICE MANUAL
1.1.2.2 Paper Handling Specification
Paper Feeding :
■
Friction
fed
(either from built-in auto sheet feeder or manual insertion slot)
■
push tractor feed (from rear tractor unit (optional))
Note) Set the release lever to correct position to select proper feeding system.
1.1.2.3 Paper Specification
<Cut
Sheet>
[With
ASFJ
Width :
182-420 mm (7.2 - 16.5”)
Note) When you use A3 size paper in landscape orientation, both left
and right margin area becomes large since the
maximum
printable
width is limited up to 345 mm.
Length :
182-297 mm (7.2 -
11.7’)
Thickness :
0.065-0.11 (0.0026 - 0.0043”)
Weight :
64.90
g/mZ
(18
-
241b./55
-78
Kg)
Quality :
Normal
PPC
paper, Bond paper
.
(With
manual insertion slot]
<Envelope>
Width :
Length :
Thickness :
Weight :
Quality :
Size :
Thickness :
Weight :
Quality :
<Continuous
form>
Width :
Thickness :
Weight
:
Quality :
Label size :
cLabel>
182-420 mm (7.2 - 16.5”)
182-420 mm (7.2 - 16.5”)
0.065-0.11 (0.0026 - 0.0043”)
52-90
g/m2
(14 -
241b.)
Normal
PPC
paper, Bond paper
#6 (W X L :
166
X
92 mm
(6VZ
x 3%”))
#10 (W
X
L : 240
X
104
mm (9?4 x 4%”))
0.16-0.52 mm (0.0063 - 0.020”)
Note) The variation in thickness within printable area must be less than
0.25 mm (0.0098”).
45-90
g/m’ (I2 -
241b.)
Normal
PPC
paper, Bond paper
101.6 -406.4 mm (4.0 -
16.0”)
0.065 -0.1 mm (0.0026 - 0.0039”)
52-82
g/m2
(14 -
221b.)
Normal
PPC
paper, Bond paper
63.5 x 23.8 mm (W x L/Minimum)
Baclcirw
vaver
size :
101.6 -406.4 mm (4.0 - 16.0”)
ThiCkn:si
:’
QuaIity
:
Notes) 1.
2.
3.
4.
Less than
0.2
mm
(0.0078”)
including backing paper.
Equivalent of normal
PPC
paper
Label can only be used under normal temperature condition.
Usable only with tractor feeding (requires optional tractor unit).
Do not perform any reverse feed.
Remove label form paper while the printer is not in use.
1-2
REV.-A