Specifications

Cleaning the Print Head

If print quality diminishes, use the printer’s built-in print-

head cleaning cycle to ensure that the nozzles are delivering

ink properly. To avoid wasting ink, clean the print head only

if print quality declines.

Follow these steps:

1. Make sure the printer is turned on and the PAUSE light is

on. If the PAUSE light is not on, press the PAUSE button to

pause the printer.

2. Hold down the ALT button and press the PAUSE button for

two seconds.

The cleaning cycle takes about 40 seconds. The PAUSE light

flashes throughout the cycle and then stays on when the

cleaning cycle is finished.

3. Press the PAUSE button to resume printing.

Information Reference List

Engineering Change Notices

None

Product Support Bulletins

None

Technical Information Bulletins

None