Specifications

To turn on Default Setting mode and print instructions, turn off
the printer. Make sure there is paper loaded in the printer.
Then hold down the
Economy/Condensed
button while you
turn the printer back on. Follow the instructions the printer
prints to change the default settings by pressing the buttons on
the control panel. When you are finished, press
Pause
and
turn off the printer to exit Default Setting mode.
The printer functions are shown in the table below and
described in the following paragraphs. The default settings are
in bold.
Setting Options
Print direction Auto, Bi-D, Uni-D
Font Roman, Sans Serif, Courier, Prestige,
Script, Roman T, Sans Serif H
Pitch 10 cpi, 12 cpi, 15 cpi, 17.1 cpi, 20 cpi,
Proportional
I/F mode Auto, Parallel, Option
Auto interface wait time 10 seconds, 30 seconds
Software ESC/P 2, IBM XL24E
Auto CR* Off, On
AGM* Off, On
Character table PC437, PC850, PC860, PC861, PC863,
PC865, Abicomp, BRASCII, Roman 8,
ISO Latin 1, Italic
International character set
for Italic table
Italic U.S.A., Italic France, Italic Germany,
Italic U.K., Italic Denmark 1, Italic Sweden,
Italic Italy, Italic Spain I
Auto line feed Off, On
Network I/F mode Off, On
0 slash 0, 0/
Page length for
continuous paper
11 inch, 12 inch, 8.5 inch, 70/6 inch, Others
Skip over perforation Off, On
Auto tear off Off, On
Controlling the Printer
2-7