Stylus 200 and Stylus Color 200 Terminal Printer Service Manual

The adjust lever on the upper case must be set to the proper position for the paper
thickness, as shown in Table 1-4.
Table 1-4. Adjust Lever Settings
Paper
Lever Position Paper Thickness
Cut Sheets
Front
(0 position)
0 mm
Envelops
Rear
(+position)
0.62 mm
Also the paper select lever on the upper case must be set to the proper position for
the paper varieties shown in Table 1-5.
Table 1-5. Paper Select Lever Settings
Specifications for
the Medium
+
PF Mode
Cut Sheets
Envelopes
Postcards
^
Lever Position ^
ASF Feed
Thick paper (Rear)
NO OK
^
Thinner paper (Front) OK NO
Manual Feed
Thick paper (Rear)
OK OK
^
Thinner paper (Front) NO NO
Note: “OK” means paper can be used and “NO” means paper cannot.
Paper In
Paper Out
Manual Feed
Auto Feed
Hopper
Paper Select Lever
Thicker Paper
Thinner Paper
Figure 1-4. Paper Select Error
Epson Stylus Color 200 /Epson Stylus 200 Product Description
Rev. A 1-5