Setup guide

Setup Guide: Set Up the Printer
10
Connect the Printer to Your
Network
Connect your printer to an Ethernet twisted-pair (10BaseT)
network connection.
1. Attach the network cable to the connector on the card.
2. To initialize the card, turn on the printer while pressing
down the status sheet button. Continue pressing the
status sheet button for five seconds.
Printing a Status Sheet:
To print a status sheet, press the status sheet button and hold it
for about three seconds. This sheet gives you important
information, including the serial number and MAC address of
the card. Keep the status sheet so you can use it when you
configure the Ethernet card.
twisted-pair (10BaseT)
status
sheet
button