Setup guide

Setup Guide: Install the Network Software
14
Follow these steps to install EPSON Status Monitor 2:
1. Insert the EPSON Stylus COLOR 850Ne CD-ROM. You
see the following screen:
If the screen does not appear, type
D:\EPSETUP (where D:
is the drive letter of your CD-ROM) and click
OK
to start
the EPSON Installation program.
2. Highlight
Install Status Monitor 2 for Network
and click
the right arrow button .
3. Close any open programs and click
Next. A screen appears
asking where you want to install Status Monitor 2.
4. Click
Next to accept the default directory or choose a
different directory and click
Next.
5. If you are using Windows 98 or Windows 95 and you have
TCP/IP installed, you see a screen asking you if you want to
enable EPSON TCP/IP printing. Select
Yes if you want to
print with TCP/IP, and then click
Next.
TCP/IP Printing: Yes_______ No_______
Note:
You may not see screens for
all the steps here, depending
on your computer’s
configuration.
Write down your settings in
the spaces provided as you
install the first part of Status
Monitor 2. You need to
select the same settings for
the second part.