Setup guide

Setup Guide: Set Up the Workstations

Changing Your Port Setting

In Windows NT 4.0, make sure the TCP/IP Print Server

service is running before you start. Then follow these steps to

change to the correct port:

1. Point to

Start

Settings

, and click

Printers

2. Highlight the

EPSON Stylus COLOR 850

printer and

right-click the icon.

3. Select

Properties

4. In Windows 98 or Windows 95, click the

Details

tab.

In Windows NT 4.0, click the

Ports tab.

5. Click

Add Port.

6. In Windows 98 or Windows 95, click

Browse and choose

the server or EPSON_TCPIP_Printer that your printer is

set up on. Then click

In Windows NT 4.0, click

LPR Port

, then type in the

printer’s IP address and the name you want to assign. Click

OK, Close, and OK again.

Installing in Windows 3.1x

1. Make sure Windows Program Manager is running and exit

any open application programs.

2. Insert the EPSON Stylus COLOR 850Ne CD-ROM.

3. Open the File menu and select

Run.

4. Type

D:\EPSETUP (where D: is the drive letter of your

CD-ROM) and click

OK. You see the Software Installation

screen (shown on page 12).

5. Highlight

Install Printer Driver and click the right arrow

button .