Setup guide

Setup Guide: Set Up the Workstations
39
6. Click
OK to install the software.
Your printer is automatically set to your local port, LPT1.
You need to change it to follow the network path to your
printer. See the section below.
Changing Your Port Setting
Follow these steps to change to the correct port under
Windows 3.1x:
1. Open the Print Manager and select
EPSON Stylus
COLOR 850
from the list of printers.
2. Select
Network Connections from the Options menu.
3. In the New Connection area, type the network path and
port, or click
Browse
to find the network path to your
printer.
4. Click
Connect
and then click
Close
.
Installing on a Macintosh
1. Turn on your printer and your Macintosh and turn off any
virus protection programs you may have.
2. Insert the EPSON Stylus COLOR 850Ne CD-ROM.
3. Double-click the
Installer icon.
4. Follow the instructions on the screen and restart your
computer.
To use the printer or configure the printer’s Ethernet card, you
need to select the
EPSON Stylus COLOR 850 AT printer in
the Chooser and make sure AppleTalk is turned on. See your
Macintosh documentation for more information.