Service manual

Stylus C41/42/43/44 series Revision B
Disassembly and Assembly Disassembly 21
2.2.3 Waste ink pad removal
1. Remove the upper housing. (Refer to Section 2.2.1)
2. Remove the ASF unit. (Refer to Section 2.2.2)
3. Remove the Waste ink pad.
Figure 2-8. Removing the Waste ink pad
T When assembling the Waste ink pad, be sure to set the tip of the
ink tube in the correct position of the Waste ink pad. Otherwise
it will cause ink leakage.
Figure 2-9. Tip of ink tube setting position
tube stopper
Waste ink pad
ADJUSTM ENT
REQUIRED
When the Waste ink pad is replaced with a new one, following service
item is required.
T Waste ink counter reset operation. ( Section 3.1.13 on page 48.)