Service manual

Stylus C41/42/43/44 series Revision B
Disassembly and Assembly Disassembly 27
2.2.7 MAIN board removal
1. Remove the upper housing. (Refer to Section 2.2.1)
2. Remove the ASF unit. (Refer to Section 2.2.2)
3. Remove the PS unit. (Refer to Section 2.2.4)
4. Remove the three screws, then remove the shield cover.
5. Eject the OHP sheet from the printer by rotating the protrusion of
the Paper Eject roller gear in CW direction.
Figure 2-25. Ejecting the OHP sheet
Protrusion