User`s guide

Plugging In and Turning On the Printer
Follow these steps to plug in and turn on your printer:
1. Make sure you have removed all protective packing
materials from inside the printer. (See the Notice Sheet for
more information.)
2. Make sure the printer is turned off by checking the position
of the
POWER
switch, as shown below.
3. Plug the power cord into a properly grounded electrical
outlet.
4. Turn on the printer by pressing the
POWER
switch.
Note:
The
Power
and
Ink Out
lights turn on to indicate that no ink
cartridge is installed.
Setting Up the Printer
1-5