User`s guide

Installing the black ink cartridge

Follow these steps to remove the color print head unit and

install the monochrome print head unit and black ink cartridge:

1. Make sure the printer is on and the printer cover is open.

2. Hold down the

Load/Eject

button for about five seconds

until the print head unit moves slightly left to the ink

cartridge install position. The

Power

light flashes.

3. Raise the blue print head unit release lever as far as it will go.

Caution:

Do not lift up the ink cartridge clamp; the ink cartridge

and print head may become unusable.

4. Grasp both sides of the print head unit and carefully lift it out

of the printer. Place the print head unit on a flat, clean surface.

release lever

Setting Up the Printer

1-11