User`s guide

7. Press down the print head unit release lever until it clicks
into place.
c
Caution:
If the
Power
and
Ink Out
lights are flashing, remove the
print head unit (beginning at step 3) and reinsert it.
8. Open the ink cartridge clamp and remove the protective
paper sheet.
9. Lower the black ink cartridge into the print head unit with
the label facing up and the arrow on the top of the cartridge
pointing toward the back of the printer.
10. Press down the ink cartridge clamp until it locks in place.
You will feel some resistance.
c
Caution:
Once you install an ink cartridge, do not open the ink
cartridge clamp or remove the cartridge except to replace it
with a new one. Once you remove a cartridge, do not reuse
it; you may damage the print head.
11. Press the
Load/Eject
button again to return the print head
to its home position. (Even if you do not press
Load/Eject
,
the printer moves the print head back to its home position
about 60 seconds after you close the clamp.)
After you install the black ink cartridge, the printer charges
the ink delivery system for about one minute. During this
time, the
Power
light flashes. When the printer finishes
charging, the
Power
light stays on.
c
Caution:
Make sure the printer completes the ink charging process
even if you plan to reinstall the color print head unit. If
charging is not completed, the printer may be damaged.
Setting Up the Printer
1-13