User`s guide

12. Close the printer cover.

Caution:

Never turn off the printer while the

Power

light is flashing.

When you switch between print head units, always leave the

ink cartridge installed. Once you remove a cartridge, do not

reuse it. Reusing a cartridge that has been removed may

damage the print head.

Use only genuine EPSON ink cartridges and do not refill

them. Other products may cause damage not covered by

EPSON’s warranty.

When you want to print in color again, replace the

monochrome print head unit with the color print head unit

as described in Chapter 5.

Checking the Paper Thickness Lever

Before you load paper, make sure that the paper thickness

lever, which controls the distance between the paper and the

printer carriage, is set correctly. The paper thickness lever is on

the top right side of the printer, next to the paper support. For

now, it should be set to the plain paper setting (forward).

thick paper

setting

plain paper

setting

1-14

Setting Up the Printer