User`s guide

For instructions on setting the lever for thick paper (or other
special media), see Chapter 3.
Loading Paper
This section explains how to load up to 100 sheets of plain
bond paper in the sheet feeder. (For instructions on loading
coated or glossy paper, envelopes, or transparencies, see
Chapter 3. For paper specifications, see Appendix A.)
Always load plain paper with the printable surface facing up.
The printable surface is marked with an arrow on most paper
packaging.
1. Push down the left edge guide lock lever; then slide the left
edge guide to the left as far as it will go.
Setting Up the Printer
1-15