User`s guide

To access the lever, open the printer cover; the lever is in the
left back corner, as shown below.
If a document is smeared, set the thickness adjustment lever to
the + position (regardless of the paper type) and print it again.
If your document still smears, enable the non-smear printing
mode. See “Using the Printer’s Control Panel” in Chapter 4 for
more information.
Loading Plain Paper
This section explains how to load plain bond paper in the
printer. For instructions on loading coated or glossy paper,
envelopes, and transparencies, see page 3-8.
You can load up to 100 sheets of plain paper in the sheet
feeder. Be sure to load it with the printable surface facing up.
The printable surface is marked with an arrow on most paper
packaging.
Paper Handling
3-5