User`s guide

Note:
You can use these instructions for printing on labels; however, be sure
to set the paper thickness lever to the thick paper position and the
thickness adjustment lever to the + position. Also make sure no labels
are curled or peeling away from the backing when you load them.
1. Push down the left edge guide lock lever; then slide the left
edge guide to the left as far as it will go.
2. Load a stack of paper, printable side up, so that its right edge
rests against the right side of the sheet feeder. Do not load
paper above the arrow mark inside the left edge guide of
the sheet feeder.
3-6
Paper Handling