User`s guide

3. Stack the paper or transparencies so the printable surface
faces up. For coated papers, the printable side is whiter
than the other side. For glossy paper and transparencies,
position the cut corner in the upper right, as shown below.
Load the paper or transparencies straight down into the
printer with the printable surface face up; then rest it
against the paper support.
4. Slide the left edge guide against the left edge of the paper;
then push up the lock lever to secure its position.
5. Change the Media Type and other printer driver settings so
they are appropriate for the paper or transparency film you
loaded.
Before printing on EPSON high-quality glossy paper or
special coated paper, make sure the color print head unit is
installed and
Color
is selected as the Head Unit setting. For
glossy paper, also select
Super - 720 dpi
for the Printing
Mode option. (See Chapter 2 for more information.)
3-10
Paper Handling