User`s guide

3. Hold down the
Load/Eject
button for about five seconds
until the print head moves slightly left, to the print head
unit replacement position. The
Power
light begins flashing.
(The print head unit returns to its home position if you do
not perform the operation in step 4 within 60 seconds.)
c
Caution:
Never move the print head unit by hand; always use the
Load/Eject
button to move it.
4. Raise the print head unit release lever as far as it will go.
c
Caution:
Do not lift up the ink cartridge clamp; the ink cartridge
and print head will become unusable.
5. Grasp both sides of the print head unit and carefully lift it out
of the printer. Place it on a flat, clean surface.
release lever
5-4
Maintenance