User`s guide

8. Press down the ink cartridge clamp until it locks in place.
You will feel some resistance.
c
Caution:
Once you install an ink cartridge, do not open the ink
cartridge clamp again or remove the cartridge except to
replace it with a new one. Once you remove a cartridge, do
not reuse it; this may damage the print head.
9. Press the
Load/Eject
button again to return the print head
to its home position. (Even if you do not press
Load/Eject
,
the printer moves the print head back to its home position
about 60 seconds after you close the clamp.)
The
Power
light flashes as the printer charges the ink
delivery system for about two minutes.
10. Close the printer cover. When the charging cycle finishes,
the
Power
light stops flashing and stays on.
c
Caution:
Never turn off the printer while the
Power
light is flashing.
Cleaning the Printer
If you want to clean the printer, follow these steps:
1. Turn off the printer and disconnect any cables connected
to it. Be sure to keep the printer cover closed as you clean it.
2. Remove any paper or other media from the sheet feeder.
3. Carefully clean away loose dust and dirt with a soft brush or
cloth.
4. Clean the exterior of the printer with a soft cloth dampened
with mild detergent.
5-10
Maintenance