User`s guide

3. Unplug the power cord from the electrical outlet.
4. Disconnect the interface cable from the printer.
5. Use a strong adhesive tape to secure the print head to the
side of the printer.
6. Remove any paper from the sheet feeder and remove the
paper support.
7. Attach the protective materials to the printer. See the Notice
Sheet that was packed with the printer.
8. Repack the printer and attachments in the original box.
Be sure to keep the printer flat as you transport it. If you notice
problems with printed output after transporting the printer,
clean the print head as described on page 5-2. If the printed
image is misaligned, calibrate the printer as described below.
Calibrating the Printer
Your printer has been calibrated at the factory so that vertical
lines in your text and graphics are properly aligned. If you
notice misaligned images in printouts, however, you can
calibrate the printer with the EPSON Printer Calibration Utility.
You may need to do this after moving the printer to a new
location, for example.
You can clibrate your printer from Windows or from DOS. To
use the Windows utility, see the next section. To calibrate from
DOS see page 5-14.
5-12
Maintenance