User`s guide

9. Select
Next
.
10. For each pattern you selected, the printer prints a Test
Alignment Sheet containing multiple samples of vertical
lines, each of which is assigned a number. One each sheet,
look for the sample that is most closely aligned.
Enter the number of the aligned sample or select
Not-aligned
if none of the samples are aligned. Then select
Next
.
11. Repeat steps 9 and 10 until all patterns are aligned.
12. Select the
Print Current Alignment Sheet
checkbox to print
a final test sheet or select
Finish
to exit the Calibration
Utility.
5-16
Maintenance