User`s guide

Printing on Special Media
3-16
3. Move the paper-release lever forward to the continuous
paper position.
4. Set the thickness lever backward to the 0 position.
5. Remove the manual feed guide by lifting it off the printer.
Caution:
If you load continuous
label paper, make sure
the printer’s auto tear-off
feature is turned off. If
you have this feature
turned on, labels could
be fed backward and
peel off inside the
printer. See page B-8 for
instructions on changing
the auto tear-off setting
using default-setting
mode.
Loire-PLUS.BK.book Page 16 Friday, May 2, 2003 2:56 PM