User`s guide

Printing on Special Media
3-29
11. When your print job finishes printing, the printer feeds the
paper to the default cut off (or tear off) position (as long as
the auto tear-off feature is on in default-setting mode). If
necessary, press the
Micro Adjust buttons to move the
paper forward or backward to the cut off position.
12. If you are using the optional Banner Paper Cutter, follow
the instructions on page 3-32. Otherwise, use scissors to cut
the paper.
To remove continuous paper, see page 3-19.
If you want to print another roll paper project, the printer feeds
the roll paper back to the loading position when it receives a
new print job.
If you won’t be using your roll paper for awhile, store it in its
original packaging. See Appendix B for optimum storage
conditions.
Before printing on another type of paper, be sure to change the
Paper Source, Paper Size, and Media Type settings in your
printer software as described in Chapters 1 and 2.
Also be sure to turn off banner mode using the default-setting
mode instructions on page B-8.
Note:
The printer saves the cut
off (or tear off) position
and it remains in effect
until you change it again,
even after turning off the
printer.
Loire-PLUS.BK.book Page 29 Friday, May 2, 2003 2:56 PM