Operation Manual

c
Caution:
❑
Do not use the knob on the left side of the printer to adjust
the tear-off position. Otherwise, you may damage the
printer or cause it to lose the top-of-form position.
❑
Never use the tear-off feature with labels. When fed
backward, labels may come off the backing and jam the
printer. When you use labels, always turn off the auto
tear-off setting using the default-setting mode.
Note:
❑
When the auto tear-off feature is on, the printer advances the
paper perforation to the tear-off position automatically after you
have finished printing a page. For more information on the auto
tear-off feature, see “Using the Default-Setting Mode” on page
6-4.
❑
The setting you make remains in effect until you change it again,
even if you turn off the printer.
To adjust the tear-off position, follow the steps below.
1. Make sure the printer is on and the paper is in the current
tear-off position.
2. Press the
Micro Adjust
button to feed paper forward, or
press
Micro Adjust
to feed paper backward. (Press either
button as many times as necessary until the perforation is
positioned correctly.)
3. Tear off any printed pages.
Note:
The printer has a minimum and maximum tear-off position, beyond
which the paper stops moving.
L
Loire-p Ref. Guide
Rev.c
A5 size Chapter 5
02-24-97 DR, pass 0
5-16
Paper Handling