User`s guide

3. Do one of the following:

◗ If you’re using a parallel cable, double-click

Install

Printer Driver for EPSON Stylus Color 3000

◗ If you’re using the included USB-to-parallel cable,

double-click

Install Printer Driver with USB To

Parallel Cable Adapter.

4. If you’re using a parallel cable or network interface card,

skip to step 5.

If you’re using the included USB-to-parallel cable, connect

it when you see the following screen, then press the P

Operate button to turn on the printer.

5. When installation is complete, click

OK or Finish. If asked

to do so, restart your computer.

6. If any screens remain open or continue to open, close them

to exit.

If you’re connecting with a parallel cable or optional

interface card, your software installation is complete.

If you’re connecting with the included USB-to-parallel

cable, continue with the following steps:

7. Click

Start > Programs > Epson > Spool Manager4.

Note:

If you see a message

that your version of

Windows may not be

supported, click OK and

continue with the

installation process. The

software will be installed

and the printer will work

correctly.

Quicksetup.fm Page 17 Friday, May 2, 2003 3:22 PM