Service manual

Chapter1 Product Description

Rev. A

1.2.5 Environmental Condition

Temperature

Operating :10 to 35 °C (Refer to the figure below for condition)

Non-operating : -20 to 60 °C(with shipment container)

Note)

1 month at 40 °C and 120 hours at 60 °C

Humidity

Operating : 20% 80% RH (without condensation. Refer to the figure below for

condition)

Non-operating : 5% 85% RH (without condensation and with shipment container)

Resistance to shock

Operating : 1G, within 1 ms X,Y,Z directions

Non-operating : 2G, within 2 ms X,Y,Z directions (with shipment container)

Resistance to vibration

Operating : 0.15G, 10 55Hz X,Y,Z directions

Non-operating : 0.50G, 10 55Hz X,Y,Z directions (with shipment container)

Note 1)

During non-operating, make sure that the head is capped.

Note 2)

During the transport, make sure that the head is capped and ink cartridge is

installed to the printer.

Note 3)

If the head is not capped at the power-off state, turn the power on with installed ink

cartridge and turn off the power after confirming that Power on operation is completed and

the head is capped.

Note 4)

Ink will be frozen under -4°C environment, however it will be useable after placing it

more than 3 hours at 25°C.

Humidity

(% RH)

°C

(°F)

80%

55%

20%

10°C

(50°F)

27°C

(80°F)

35°C

(95°F)

Guaranteed range

Figure 1-5. Temperature/Humidity of Range