Service manual

Chapter3 Disassembly and Assembly
Rev. A
3-11
3.2.4.2 Removing the Absorber Tray Assembly ;A
1. Remove the housing. (Refer to 3.2.1)
2. Remove the operation panel. (Refer to 3.2.3)
3. Remove one screw (No.4) securing “Absorber tray assembly” located on the right side of the printer
mechanism.
4. On the same right side of the printer mechanism, release the hook securing the absorber tray
assembly ;A on the frame and remove it, pulling it downward.
When installing the absorber tray assembly ;A, make sure to fix it with spacer tray in the left side
of the printer mechanism.
WORK POINT
Spacer Tray
(No.4)
Absorber Tray Assembly;A
Figure 3-8. Removing the Absorber Tray Assembly ;A