Specifications

Introduction Page 10
System Requirements
To use your printer and its software with a PC, your system should
have:
◗ Windows
®
3.1x, Windows 95, Windows 98, or Windows NT
®
4.0
◗ An IBM
®
compatible PC with at least a 486/25 MHz processor
for Windows 95 and Windows NT 4.0; 486/66 MHz processor
for Windows 98; and 386/25 MHz processor for Windows 3.1.
A Pentium
®
processor or its equivalent is recommended.
◗ 16MB RAM (32MB recommended)
◗ At least 50MB of free hard disk space for storing images
(100MB recommended)
◗ VGA or better display adapter and monitor
◗ Double-speed CD-ROM drive (quad-speed or faster
recommended)
◗ A high-speed, bidirectional, IEEE-1284 compliant parallel cable
(6 to 10 feet long) to connect your computer to the printer. The
cable must have a D-SUB, 25-pin, male connector for your
computer and a 36-pin, Centronics
®
compatible connector for
the printer.