Specifications

Troubleshooting Page 121
P S B A When all the lights flash, your printer may have an internal error.
Turn off the printer by pressing the Ppower button; wait several
seconds; then turn it on again. If this does not clear the error
condition, contact EPSON as described in the Introduction.
P S B A When all the lights are off, the printer is not receiving power. Try
these solutions:
◗ Make sure the printer is turned on.
◗ Turn off the power and plug the power cord into the outlet
again.
◗ Plug a lamp into the outlet to make sure the outlet is working.
Also, make sure the outlet isn’t controlled by a switch or
timer.