User`s guide

Managing Print Jobs and Network Printing
4-3
◗ Select the information you want to see in the Spool
Manager window
◗ Prevent the Despooler popup window from appearing on
your screen whenever you print
◗ Change your default spool directory
Deleting a Stalled Print Job
If you’re having trouble printing, it may be because of a stalled
print job. Follow these steps to delete it so you can continue
printing:
1. Open the Spool Manager as described on page 4-2.
2. Click on any print jobs marked
Held, then open the
Document menu and click
Delete.
3. Click
Yes.
4. Exit Spool Manager and try printing again.
Changing the Default Spool Directory
If you get an error message when you try to print, or printing is
very slow, you can try changing your default spool directory.
Follow these steps:
1. Make a directory on your hard disk where you want Spool
Manager to store print jobs, for example, C:\SPLTEMP.
2. Open the Spool Manager as described on page 4-2.
3. Make sure
EPSON Stylus COLOR 600 is selected, and then
choose
Setup from the Queue menu. The Queue Setup
dialog box appears.
For information about any
of these procedures, use
the Spool Manager Help
menu.
printjob.fm5 Page 3 Thursday, July 24, 1997 3:05 PM