Printer User Manual

11
Setup Guide
If you use NetWare 4.x, menus will differ slightly from the
menus described in the following procedure, and you must
select Bindery Emulation.
Follow these steps:
1. At the DOS prompt, type
PCONSOLE
.
2. From the Available Options menu, select
Print Server
Information.
3. Select the name of a print server from the Print Servers list
and press
Enter
.
4. From the Print Server Information list, select
Print Server
Configuration.
5. Select Printer Configuration.
6. Select a port number in the Configured Printers list.
7. Select the name of your printer on the Printer
Configuration menu. Then highlight the Printer Type and
select
LPT1.
8. Press Esc; then press Enter to save changes.
9. Select
Queues Serviced by Printer
from the Print Server
Configuration menu and assign a queue to the print server
port from the Available Queues list. Then press Esc to exit.
QuikSet2.fm Page 11 Wednesday, October 15, 1997 3:49 PM