Operation Manual

R4C623Setup Guide
Rev_C
A5 size SETUP.FM
10/18/00 Pass 0
R
Proof Sign-off:
Ichihara, CRE Moriyama_______
N.Nomoto _______
_______
For Windows 3.1 users
Follow the steps below to install the software in Windows 3.1.
1. Make sure that Windows 3.1 is running and the Program Manager
window is open.
2. Insert the printer software CD that is shipped with your printer in the
CD-ROM drive. (If you use the floppy disk version, insert the disk in
the disk drive.)
3. Click
Run
on the File menu. The Run
dialog box appears. In the Command
Line text box, type
D:SETUP
and click
OK
. The installation program copies
the printer software files.
Note:
If the CD-ROM drive is assigned a drive letter other than “D” or if you are
using the floppy disk version of the software, substitute the appropriate letter.
4. When the installation is complete, click
OK
to exit the installation
program.
The installation program automatically selects this printer as the default
printer for Windows applications.
For information on accessing and using the software, see “Using the Printer
Software for Windows” in the
Daily Use
guide.
For Macintosh users
Macintosh users must first install the printer software, and then select the
printer in the Chooser.
?
Caution:
Turn off all virus protection programs before installing the printer software.
Installing the software
Follow the steps below to install the printer software.
1. Turn on your Macintosh and insert the software CD in the CD-ROM
drive. The contents of the EPSON printer software CD are displayed.
2. If a single
Installer
icon is displayed, double-click the icon. If separate
folders containing installer icons for several languages are displayed,
double-click the folder for your preferred language, then double-click
the
Installer
icon inside it.