Installation Instructions

R4C623Setup Guide
Rev_C
A5 size SETUP.FM
10/18/00 Pass 0
R
Proof Sign-off:
Ichihara, CRE Moriyama_______
N.Nomoto _______
_______
Checking the print head nozzles
Make sure that the printer is
turned off. Hold down
the
-
load/eject button (
➀
in
the illustration) and press
the
2
power button (
➁
in the
illustration) to turn on the
printer. Then release both
buttons.
Here are sample printouts.
If the nozzle check page does not print satisfactorily (for example, if any
segment of the printed lines is missing), then you should clean the print
head as described below. If the printout is satisfactory, you are ready to
print your first page. See “Printing Your First Page” for instructions.
Cleaning the print head
Follow the steps below to clean the print head.
1. Make sure that the
2
power light is on and that both the
*
black and
)
color ink out lights are off.
2. Hold down the
4
cleaning button for three
seconds.
The printer starts cleaning
the print head and the
2
power light begins
flashing. Print head
cleaning takes about thirty
seconds to complete.
?
Caution:
Never turn off the printer while the 2 power light is flashing. Doing
so may damage the printer.
3. When the
2
power light stops flashing, print a nozzle check pattern to
confirm that the head is clean and to reset the cleaning cycle.
If print quality hasn’t improved after repeating the nozzle checking and
cleaning procedures four or five times, contact your dealer.
segments are missing
Good Sample Print head Needs to be cleaned.