Specifications

7
Stand-alone Copying
■
Basic Copying
■
Changing Copy Settings
Basic Copying
1. Open the scanner lid.
2. Place your document face-down on the glass, in the corner shown below. Move
your document about 0.1 inch from the top and side edge so your entire
document is scanned.
3. Close the scanner lid.
4. The default copy settings are displayed on the control panel. Change any
necessary copy settings, as described in Changing Copy Settings.
5. Press the
Color Copy
button (for color copies) or
B&W Copy
button (for black
and white copies). Your document is scanned and then printed. If you’re using the
2-up
Copy Mode setting (see Type of Copies), repeat these steps for your second
page.
Note: Your copied image size may not be the exact same size as your original.
Move the document
in about 0.1 inch from
the edges