Specifications
8
Changing Copy Settings
The current copy settings are shown on the LCD screen. You can change copy
settings using the control panel, as described below.
When you finish changing a setting, press the
Stop
button.
Note: To clear a setting, press the
Reset
button. To clear all the setting changes
you’ve made, press and hold the
Reset
button for at least 3 seconds.
If you’ll be changing the Copy mode setting (as described in Type of Copies
),
select your Copy mode before selecting any other copy settings.
Number of Copies
Press the
+
or
-
Copies
buttons. (If you’re using the
2-up
Copy Mode setting (see
Type of Copies), you can’t select the number of copies.)
Paper Size
Press a
Menu
button until you see
Paper size
on the LCD screen. Then press the
+
or
-Value
buttons to select the size of the paper you loaded, either
Letter
,
4 × 6
,
5 × 7
, or
A4
(8.3 × 11.7 inches).
Lighten or Darken
Press a
Menu
button until you see
Lighter/Darker
on the LCD screen. Then press
the
+
or
- Value
buttons to lighten or darken your copies.
Current settings are shown here
Menu
buttons
Copies/Value buttons
(+ and -)
Stop
button
Reset
button