Specifications

52
Caution: Be careful not to wipe the metal carriage shaft.
Never use a hard or abrasive brush, or alcohol or thinner for cleaning; they can
damage the printer components, document table, LCD panel, and case.
Don’t get water on the components and don’t spray lubricants or oils inside the
EPSON Stylus CX3200.
Don’t spray glass cleaner onto the document table glass.
Don’t use any cleaning sheets included with special paper; they may jam inside
the EPSON Stylus CX3200.
Transportation
If you move your EPSON Stylus CX3200 some distance, you need to prepare it for
transportation in its original box or one of a similar size.
Caution: To avoid damage, always leave the ink cartridges installed when
transporting the EPSON Stylus CX3200. Never transport or store the Stylus
CX3200 on its side or in a tilted or upside-down position.
1. Press the
On
button to turn on the EPSON Stylus CX3200 and wait until the
scanner carriage moves to the home position (toward the left side) and the print
head locks in the far right position, then turn it back off.
2. Open the scanner lid and slide the transportation lock to the locked position.
3. Unplug the power cord from the electrical outlet. Then disconnect the USB cable.
4. Remove any paper from the sheet feeder and output tray, then remove the paper
support and feeder guard.
5. Lift up the scanner.