Specifications

58
You cancelled software installation or connected the EPSON Stylus CX3200 at
the wrong time.
Your EPSON software may be incorrectly installed. See Uninstalling Software to
uninstall your software. Make sure you carefully follow the steps on your Start Here
sheet when you reinstall your software. You need to connect the Stylus CX3200 at the
correct time.
You’re having problems installing the software.
■
Make sure your system meets the requirements listed in the Requirements and
Notices booklet. Close other programs, including screen savers and virus
protectors, and install again.
■
Make sure that the Universal Serial Bus (USB) Controller is working properly in
Device Manager; see your Windows help system for details.
■
If you see an error message or the software doesn’t install correctly on
Windows XP or Windows 2000, you may not have software installation
privileges.
■
If the
CX3200
icon doesn’t appear in the Macintosh Chooser, you may have too
many items in the Chooser. Delete any unused items.
■
If you’re printing over a network, see Setting Up Network Printing for
instructions on configuring your EPSON Stylus CX3200.
Printing and Copying
Only the
On
light is on, but nothing prints.
■
Make sure the USB cable is securely connected at both ends and meets the system
requirements listed in the Requirements and Notices booklet.
■
If you’re using a USB hub, try connecting the Stylus CX3200 directly to your
computer’s USB port instead.
■
Run a nozzle check as described in Printing a Nozzle Check. If the check page
prints, make sure the EPSON Stylus CX3200 software is installed correctly on
your computer.
■
If you’re printing on a network, you need to set up your EPSON Stylus CX3200
for network printing, as described in Setting Up Network Printing.